Sanding/Finishing With a Rotary Tool
If sanding isn’t your thing, you may want to use a Dremel tool. These tools are really handy for a variety of crafts. Always wear a mask when sanding.
Using a rotary tool on Puduo Epoxy Resin gives you complete control to be as precise as required for even the most delicate work. The variety of bits and attachments is amazing. They even have a flex shaft that makes it feel like your holding a marker instead of a powerful tool. Tapping the photo below will take you to Amazon for the Dremel with the flex shaft included..
Using the tool is pretty simple. Practice on anything to get a feel for the tool, it’s speeds, and features. You shouldn’t need the highest speed to sand your creation.
Here’s how to begin:
- Select the bit you want to use. There’s a large selection of bits available, and some have different sized shafts. Use the appropriate sized collate to ensure a tight fit for the bit.
- Turn the tool on and gently touch the bit to the part of your project you want to sand.
- Slowly go around the edges until they are smoothed down how you want them.
The US support team is always here to help you through your resin art journey! Please don’t hesitate to reach out to us for any questions or support! Happy creating!
Please enjoy the video below. This will give you a brief introduction to sanding with a rotary tool.